搜索结果: 1-15 共查到“材料科学基础学科 Steel”相关记录52条 . 查询时间(0.036 秒)
西安交通大学工程材料基础课件Chapter3 HEAT TREATMENT OF STEEL
西安交通大学 工程材料基础 课件 Chapter3 HEAT TREATMENT OF STEEL
2014/7/25
西安交通大学工程材料基础课件Chapter3 HEAT TREATMENT OF STEEL。
西安交通大学工程材料基础课件Chapter2 CARBON STEEL。
Effect of deformation-induced martensite on the microstructure, mechanical properties and corrosion resistance of X5CrNi18-8 stainless steel
Austenitic stainless steel Plastic deformation Mechanical properties Weight loss method H2SO4 solution
2010/8/17
The chemical, machinery, food, automotive, building, nuclear and shipbuilding industry requires increasingly steels with good combination of excellent corrosion resistance, high mechanical properties ...
Effect of heat treatment on mechanical properties of H11 tool steel
Tool steel Heat treatment Hardening
2009/12/14
Purpose: AISI H11 is a special alloy steel, categorized as chromium tool steel. Because of its high toughness and hardness, it is well suited for hot work applications involving very high loads. Typic...
The influence of the martensite α’ phase occurring in the structure of cold rolled austenitic Cr-Ni steel on its mechanical properties
Metallic alloys Austenitic stainless steel Plastic deformation
2009/12/3
Purpose: In this paper the mechanical properties and structure of cold rolled austenitic stainless steel X5CrNi18-8
with a draft of 17%-78% were presented.
Design/methodology/approach: The main meth...
Effect of cold rolling and annealing on mechanical properties of HSLA steel
Mechanical properties HSLA steel strip Cold rolling
2009/12/3
Purpose: was to examine effect of the parameters of cold deformation and recrystallization annealing on mechanical properties of a Nb-microalloyed HSLA steel.
Design/methodology/approach: Research of...
Some mechanical and magnetic properties of cold rolled X5CrNi18-8 stainless steel
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/2
Purpose: The paper analyzes the influence of the degree of cold deformation on the structure forming and
changes of mechanical and magnetic properties of cold-rolled sheet on austenitic X5CrNi18-8 st...
The effect of nitrogen and vanadium on hardenability of medium carbon 0.4 %C and 1.8 %Cr steel
Manufacturing Hardenability of steel High strength low alloy steels
2009/12/2
Purpose: To investigate the effect of V and N on hardenability of steel containing 0.4 % C and 1.8 % Cr.
Design/methodology/approach: Four laboratory melts with different N and V contents were used.
...
The influence of austenitization on grain size and mechanical properties of regenerative G21CrMoV4–6 cast steel
Metallic alloys Mechanical properties Quantitative metallography
2009/12/2
Purpose: Influence of austenitiziation parameters (temperature and time) on grain size and mechanical properties
of low alloy cast steel have been investigated.
Design/methodology/approach: The grai...
Tool flank wear analyses on martensitic stainless steel by turning
Machining Wear resistance Flank wear
2009/12/2
Purpose: Purpose of this research was to demonstrate tool wear by hard turning of martensitic stainless steel and
this material is pronounced as difficult to machine material. The evaluation was done...
Influence of plastic deformation on structure and mechanical properties of stainless steel type X5CrNi18-10
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/2
Purpose: The paper analyzes the influence of the degree of cold deformation on the structure and mechanical
properties of austenitic stainless steel X5CrNi18-10.
Design/methodology/approach: The ...
Effect of retained austenite on the fracture toughness of tempered tool steel
Tool materials Fracture toughness Retained austenite
2009/12/2
Purpose: This paper is an attempt of reviewing the outlooks about the favourable influence of retained austenite
on fracture toughness of tool steels according to results of investigation concerning ...
The structure and properties of steel with different pearlite morphology and its resistance to abrasive wear
Abrasive wear Block sections Switch Pearlite morphology Isothermal annealing
2009/12/2
Purpose: The analyse of pearlite morphology changes as a result of hot rolling process and isothermal annealing.
Design/methodology/approach: Physical modelling of isothermal annealing for a transiti...
Effect of carbon content upon the early stage of tempering of steel with Mn and V addition
Metallic alloys Dilatometric method Tempering ε carbide
2009/12/1
Purpose: In this paper the effect of carbon content on the transformations taking place at the early stage of tempering
(precipitation of the ε carbide) of the model alloys with manganese and vanadiu...
The influence of pre – tempering on the mechanical properties of HS18-0-1 high speed steel
Tool materials Pre-tempering Mechanical properties High-speed steel
2009/12/1
Purpose: Main objective of the research presented in this work was the evaluation of the influence of pre-
tempering on the properties of HS18-0-1 steel after principal tempering.
Design/methodology...