搜索结果: 1-11 共查到“工学 implants”相关记录11条 . 查询时间(0.062 秒)
Electrochemical investigations of Ti6Al4V and Ti6Al7Nb alloys used on implants in bone surgery
Electrochemical investigations Ti6Al4V Ti6Al7Nb alloys implants in bone surgery
2010/8/11
Attempts, when titanium and its alloys in bone surgery wereused go back to the nineteen-forties. In the initial period of using Ti alloys there were niggles with their mechanical properties,which were...
Corrosion resistance of metallic implants used in bone surgery
Biomaterials Pitting corrosion Biocompatibility
2009/12/2
Purpose: The purpose of the research was analysis of influence of mechanical damages on the implants’ surface
made of Cr-Ni-Mo steel on the pitting corrosion resistance. Analysis was performed for im...
Surface modification and corrosion behavior of Ni-Ti alloy used for urological implants
Metallic alloys Biomaterials Corrosion
2009/12/1
Purpose: The work presents the influence of the surface treatment of Ni-Ti alloy, intended for implants applied
in urogenital surgery, on their corrosion resistance. The tests were carried out in the...
Forming of the titanium implants and medical tools by metal working
Plastic forming Implants Biomaterials Titanium alloys
2009/12/1
Purpose: of this paper is to present some technological problems with forming of the titanium implants and
medical tools by the plastic working methods.
Design/methodology/approach: Application of...
Develop mono-block tooth implants using automate design and FEM analysis
Automation engineering process CAD systems CAM systems Mono-block Dental implant
2009/12/1
Purpose: Purpose of this paper is present a new approach to modelling and design the low cost mono-block
dental implants based on the integration of the computer aided techniques. This approach prov...
Structure and properties of Titanium for dental implants
submicrocrystalline structure severe plastic deformation (SPD) ECAP
2009/10/23
This paper describes manufacture of nano-structural titanium, its structure and properties. Nano-titanium has higher specific strength properties than ordinary (coarse-grained) titanium. Nano-titanium...
The Elaboration of Optimal Structure of Flat Implants For Hernia Treatments
harnia surgical mesh polypropylene structure strength
2009/6/17
One of the most commonly conducted procedures in general surgery is hernia treatment. This problem concerns approx. 4% of the human population. The factor that significantly lowers the efficacy of the...
Influence of bone union electrostimulation on corrosion of Ti6Al4V ELI alloy implants
Biomaterials Ti6Al4V ELI alloy Corrosion
2010/2/8
Purpose: The aim of the work was determination of influence of the selected methods of bone union electrostimulation on corrosion of Ti6Al4V ELI alloy implants.
Design/methodology/approach: In vitro ...
Stresses present in bone surrounding dental implants in FEM model experiments
Numerical techniques Dental implant Bone
2010/2/8
Purpose: Appropriate selection of material and geometric characteristics of intraosseus pillar implant part creates a possibility to control the bone tissue loading.
Design/methodology/approach: A ba...
Improvements of medical implants based on modern materials and new technologies
Metallic alloys Metallic biomaterials Medical implant
2010/2/9
Purpose: Modern medical implants are products with pretentious requirements regarding materials, machining technologies and their functionality. In general they are divided into two main groups which ...
A new approach to modelling and designing mono-block dental implants
Automation engineering process CAD systems CAM systems
2010/2/22
Purpose: of this paper is present a new approach to modelling and design the low cost mono-block dental implants based on the integration of the computer aided techniques. This approach provides the a...