搜索结果: 1-15 共查到“工学 Stainless steel”相关记录31条 . 查询时间(0.143 秒)
An Analysis of Milk Fouling Formed During Heat Treatment on a Stainless Steel Surface with Different Degrees of Roughness
pollutions surface area roughness
2016/7/6
Results of research on the effect of stainless steel (SS) surface roughness on the amount and microscopic structure of milk impurities, formed under the influence of high-temperature milk processing a...
Transfer of Listeria Monocytogenes from Stainless Steel and High Density Polethylyene to Cold Smoked Salmon and Listeria Monocytogenes Biofilm Cohesive Energy Investigation
Efficiency of Transfer Cohesive energy
2014/10/22
Listeria monocytogenes is a major concern for the food industry. It is one of the major agents causing listeriosis. The objective of the first part of this study is to evaluate the effect of hydration...
Load Bearing Capacity and Safety Analysis for Strain-hardening Austenitic Stainless Steel Pressure Vessels
pressure vessel austenitic stainless steel strain hardening
2011/8/4
By increasing the yield strengths of austenitic stainless steels for pressure vessels with strain hardening techniques, the elastic load bearing capacity of austenitic stainless steel pressure vessels...
Wear of plasma nitrided and nitrocarburised AISI 316L austenitic stainless steel
Wear of plasma nitrided nitrocarburised AISI 316L stainless steel
2010/8/12
The use of coatings and surface engineered components is increasing and is driven by the need for improved hardness, corrosion and wear resistance [1]. Austenitic stainless steels are the most importa...
Microstructure and properties of laser surface alloyed PM austenitic stainless steel
Microstructure properties laser surface PM austenitic stainless steel
2010/8/12
Laser surface alloying is a unique method where the external alloying elements in the form of powder, past, suspension, electrolytic coatings and plasma or flame sprayed coatings are introduced into a...
Effect of deformation-induced martensite on the microstructure, mechanical properties and corrosion resistance of X5CrNi18-8 stainless steel
Austenitic stainless steel Plastic deformation Mechanical properties Weight loss method H2SO4 solution
2010/8/17
The chemical, machinery, food, automotive, building, nuclear and shipbuilding industry requires increasingly steels with good combination of excellent corrosion resistance, high mechanical properties ...
Yield stress of duplex stainless steel specimens estimated using a compound Hall–Petch equation
Yield stress duplex stainless steel specimens estimated compound Hall–Petch equation
2010/10/12
In this study, the 0.2% yield stress of duplex stainless steel was evaluated using a compound Hall–Petch equation. The compound Hall–Petch equation was derived from four types of duplex stainless stee...
The influence of the sintering conditions on the properties of the stainless steel reinforced with TiB2 ceramics
AISI 316L stainless steel TiB2 ceramics Sintering
2010/1/11
The paper analyzes the influence of the temperature and pressure on the properties and structure of the austenitic AISI 316L stainless steel reinforced with 1% vol.TiB2 ceramics.
Structure and properties of forming austenitic X5CrNi18-9 stainless steel in a cold working
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/14
Purpose: The aim of the paper is to analyze the influence of the degree of rolling reduction on the structure forming and changes of mechanical properties in cold-rolled sheet-metals of austenitic X5C...
Potentiodynamic studies of stainless steel wire for endourology
Metallic alloys Biomaterials Corrosion
2009/12/3
Purpose: The purpose of the study is to evaluate resistance to electrochemical corrosion of wire made of Cr-Ni stainless steel, designed for use in endourological treatment. The influence of strain fo...
Some mechanical and magnetic properties of cold rolled X5CrNi18-8 stainless steel
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/2
Purpose: The paper analyzes the influence of the degree of cold deformation on the structure forming and
changes of mechanical and magnetic properties of cold-rolled sheet on austenitic X5CrNi18-8 st...
Tool flank wear analyses on martensitic stainless steel by turning
Machining Wear resistance Flank wear
2009/12/2
Purpose: Purpose of this research was to demonstrate tool wear by hard turning of martensitic stainless steel and
this material is pronounced as difficult to machine material. The evaluation was done...
Influence of plastic deformation on structure and mechanical properties of stainless steel type X5CrNi18-10
Metallic alloys Austenitic stainless chromium-nickel steel Plastic deformation
2009/12/2
Purpose: The paper analyzes the influence of the degree of cold deformation on the structure and mechanical
properties of austenitic stainless steel X5CrNi18-10.
Design/methodology/approach: The ...
Ultra-precision machining of stainless steel using coated carbide tool
Machining Carbide tool Lubricant Stainless steel
2009/12/2
Purpose: This paper discusses the experimental work carried out to investigate the performance of coated carbide
tool in ultra-precision machining of stainless steel and evaluates whether this tool c...
Flattening of narrow and thin stainless steel strips
Plastic forming Ball rolling mill Stainless steel
2009/12/2
Purpose: The purpose of this paper is to evaluate the influence of technological parameters of flattening in the
ball rolling mill on spread and geometrical properties of strips made of stainless ste...